Fuzzy XL Insides Only are just the two inside pieces of the mold. The insides will need to be the same as the outsides in regards to ball size and leg type. You can not choose a different size ball as all four pieces of the mold makes up the ball.
However, you can choose to have it with the wire or without.
There is a Bundle Option available with Fuzzy XL Mold, 2 Insides Only, Core Ball Mold, and Clamping System.
This is a clamping system specifically designed for the Fuzzy XL Molds but will work with the Fuzz625 and Fuzz750 molds if you put something 1/2" under the mold.
You will attach the two outside parts of the molds (we call them the cones) to the clamps. This will allow the cones to move in and out with the clamps. This allows you to close it, shoot your mold, open it, remove JUST the filled insides, and then place empty insides in, close it, and shoot it again while the first set of insides are cooling and setting up.
Fuzzy Ball XL Bundle-This bundle comes with 1 Fuzzy Ball XL Mold (all 4 pieces of the mold), 2 separate sets of the Insides (just the 2 inside pieces of the mold), 1 Core Ball Mold (any size you like), and the Fuzzy Ball Clamping System.
-For an additional fee of $50 the Fuzzy Ball XL Bundle is available with DIFFERENT Ball sizes for the 2 cavities. For example: you could have one cavity with the 5/8" ball and the other cavity with the 1" ball. This option is only available when purchasing the bundle. Please call the office 318-255-7144 to purchase with the 2 different ball sizes.
DUE TO A SUPPLY ISSUE, WE ARE NOT ABLE TO TAKE YOUR ORDER ONLINE. LEAD TIME IS CURRENTLY 2 MONTHS OUT. PLEASE CONTACT OUR OFFICE AT OR CALL 318-255-7144 AND ASK FOR CHERIE FOR MORE INFORMATION.
These systems are CUSTOM BUILT and only have a few available at a time. If it is sold out please sign up on our wait list and you will be contacted shortly.
This system is NOT designed to cook plastisol...it is designed to hold it at a set temperature while you are shooting your molds. Cooking plastisol in this system WILL void the warranty.
PLEASE NOTE!!! THE SHIPPING CHARGED DURING CHECKOUT IS NOT CORRECT. YOU WILL BE CONTACTED WITH THE REMAINING SHIPPING BALANCE AFTER YOU HAVE PLACED YOUR ORDER. IF YOU WOULD LIKE TO CHECK YOUR SHIPPING AMOUNT BEFORE ORDERING PLEASE EMAIL US AT .
Telephone: 1-318-255-7144
The pots and manifold are solid aluminum, for maximum heat transfer. All parts are CNC machined in-house.
Features:
Ports on each pot for single color use
Center manifold/port for two-color injection/lamination
Pocket in the manifold for heating injector
Pot lids have a view-port and hold the stirrer motor in position
Stirrer motors are VARIABLE speed with a maximum speed of 75 rpm
Both pots have a ceramic insulating blanket with a protective aluminum wrap
The system is mounted to an aluminum base plate, with "U" brackets at each port for locking injectors in position while drawing plastic
A control box is mounted under the base plate: there are 2 rear power cords. Temperature controllers, motor speed controllers, and switches are mounted in the front panel, stirrer motors plug into the side panels. A ventilation fan and louvers in the side panels maintain an airflow across the controls and relays
Specification:
115 VAC
20 AMPS
2 x 1000 watt heaters (8.7 amps each)
Motors/Controls (0.5 amps each)
Pot capacity 2 x 96 fluid ozs. (6 quarts total)
1:1 Twin Injector included 8 oz (2 x 4 oz barrels)
Temperature controllers are digital, with Fahrenheit readout and temperature sensors. Temperature is maintained to within +/- 4 deg, although this can be adjusted through the controller
NOTE:
The cost of shipping with full insurance via UPS will be charged at a discounted rate.
Due to the custom nature of these machines, please allow three to four weeks from the time of order to shipping.
