California has issued a Warning for all aluminum products see – CA Prop 65
-
Big pincers added to our popular Crazy Craw body make for an awesome profile and great action. -
Three (3) White O-Ring's for the brass ports on the front of the Mini and Regular (Large) Shooting Star Injection System. -
The Ultra Molds Brush Whacker is one of the most sought after molds on the market. With the perfect length curled legs, you get some of the best action seen in this style bait. The bait injects well just about any way you can imagine. With the taper of the bait behind the second appendage, you can inject some amazing color combinations with clean lines, as well as a top and bottom laminate color combo. When the grass and structures are the things to fish, you have so many options of presentation. Weightless, to get the slow decent. Tokyo rig, to make the presentation irresistible. You can bet this is one that will be a keeper. -
These coil pins sit in the injection port under the brass disk. It is a guide to know when to stop turning your injector to the 'open' or 'closed' position in the Shooting Star and Mini Shooting Star. -
The Craw Chunk is a twin tail craw trailer that gives a perfect thickness to the claws to get that desirable fluttering behind your favorite spinnerbait or jig. This trailer shoots very clean lines as a top and bottom laminate or as a single color to complement the color of your tackle. Being able to match this to any skirt and know that it has enough body through the hook point to stay on your lure can make the difference in a bad day on the water and being able to stand on the podium at the end of a tournament. -
A millipede style bait with 20 pairs of legs. -
A creature bait like no other … Large flapping pincers mimic a crawfish while multiple segmented appendages resemble those of a spider. We call it the spider-craw. -
The Curl Tail Grub can be one of the best style molds for the crappie fisherman as well as the salt water guys. This mold has a standard grub body with enough thickness to withstand some of the hardest hits by the fish. Injecting from soft to saltwater blend plastisol can give you that perfect action or stiffness you are after. The tapered tail has enough curl to give that perfect tail action that you are after. With it being a thinner tail, you can still create some unbelievable transitions between top and bottom laminates. This mold also produces some amazing looking baits when shot with a tail body laminate. -
The Drop Shot Worm is a smooth sided worm on top and bottom. With the top contoured and the bottom perfectly flat, it's almost endless in the ways you can rig it. The thick paddle type tail give you the opportunity to work the drop shot as a finesse style worm, drop shot rig, weightless, or as a wacky rig. Coupling this mold with the shooting star gives you more color possibilities than you can imagine. The Twin 3:1 injector will allow you to run almost a solid color with an accent line. Whether you are running it as a solid color or a laminate, you can bet this will be one you want to keep in your arsenal while on the water. -
A flat tailed worm designed for drop-shotting.
-
27 legs extend from the center ball to an outer diameter of 2.5 inches.
Legs have a slight taper to enhance their action.
Primarily designed for catching smallmouth and largemouth bass when using forward-facing sonar.
-
This is a clamping system specifically designed for the Fuzzy XL Molds but will work with the Fuzz625 and Fuzz750 molds if you put something 1/2" under the mold.
You will attach the two outside parts of the molds (we call them the cones) to the clamps. This will allow the cones to move in and out with the clamps. This allows you to close it, shoot your mold, open it, remove JUST the filled insides, and then place empty insides in, close it, and shoot it again while the first set of insides are cooling and setting up.
-
Fuzzy XL has an 3.7" overall diameter. You have different ball size options and different leg shapes to choose from. It does have wire slot but that can be removed at special request.
Please note: The bigger the ball, the longer the set up time is for the injected plastic. If you would like to get a bigger ball please look at our Core Ball Molds for the Fuzzy XL.
-
Fuzzy Ball XL Bundle-This bundle comes with 1 Fuzzy Ball XL Mold (all 4 pieces of the mold), 2 separate sets of the Insides (just the 2 inside pieces of the mold), 1 Core Ball Mold (any size you like), and the Fuzzy Ball Clamping System.
-For an additional fee of $50 the Fuzzy Ball XL Bundle is available with DIFFERENT Ball sizes for the 2 cavities. For example: you could have one cavity with the 5/8" ball and the other cavity with the 1" ball. This option is only available when purchasing the bundle. Please call the office 318-255-7144 to purchase with the 2 different ball sizes.
-
The Core Balls for the Fuzzy XL have many possible uses:
-You can use these to make the center of the ball one color and overlay with another color making a Core Shot
-You can use this as a filler ball so there is not much plastic to have to cool down when you are shooting one of the larger balls. This would reduce set-up time for the plastic and potentially speed up production.
-You can use a different density or grade of plastic for the core. You could have a dense, sinking plastic for the core and a floating formula around it.
-
Fuzzy XL Insides Only are just the two inside pieces of the mold. The insides will need to be the same as the outsides in regards to ball size and leg type. You can not choose a different size ball as all four pieces of the mold makes up the ball.
However, you can choose to have it with the wire or without.
There is a Bundle Option available with Fuzzy XL Mold, 2 Insides Only, Core Ball Mold, and Clamping System.
-
Pair of Hot Mill Gloves. (SIZE-XL) -
The injectors have a quick release locking pin for the tip Our Medium injector holds 4oz Our Large injector holds 8oz -
Ideal for keeping single or twin injectors warm, when you are producing a run of bait. Ideal if you are switching between colors and using multiple injectors, or if it is cold and you simply need to keep it hot between shots. Compatible with either our twin or single injectors. A must-have for any work station. -
This listing is for a replacement Heater element for the Injector Heater. -
This O-Ring Kit will provide you with all O-Rings needed for our Twin Injectors. Simply pick the injector type (1:1 Twin, 3:1 Twin, Swirl, 4 oz Single, 8 oz Single ) that you need replacements for from the drop-down menu. You now can also choose between the Quad O-Ring and Round O-Ring for your pistons. -
Out of stock
DUE TO A SUPPLY ISSUE, WE ARE NOT ABLE TO TAKE YOUR ORDER ONLINE. LEAD TIME IS CURRENTLY 2 MONTHS OUT. PLEASE CONTACT OUR OFFICE AT OR CALL 318-255-7144 AND ASK FOR CHERIE FOR MORE INFORMATION.
These systems are CUSTOM BUILT and only have a few available at a time. If it is sold out please sign up on our wait list and you will be contacted shortly.
This system is NOT designed to cook plastisol...it is designed to hold it at a set temperature while you are shooting your molds. Cooking plastisol in this system WILL void the warranty.
PLEASE NOTE!!! THE SHIPPING CHARGED DURING CHECKOUT IS NOT CORRECT. YOU WILL BE CONTACTED WITH THE REMAINING SHIPPING BALANCE AFTER YOU HAVE PLACED YOUR ORDER. IF YOU WOULD LIKE TO CHECK YOUR SHIPPING AMOUNT BEFORE ORDERING PLEASE EMAIL US AT .
Telephone: 1-318-255-7144
The pots and manifold are solid aluminum, for maximum heat transfer. All parts are CNC machined in-house.
Features:
Ports on each pot for single color use
Center manifold/port for two-color injection/lamination
Pocket in the manifold for heating injector
Pot lids have a view-port and hold the stirrer motor in position
Stirrer motors are VARIABLE speed with a maximum speed of 75 rpm
Both pots have a ceramic insulating blanket with a protective aluminum wrap
The system is mounted to an aluminum base plate, with "U" brackets at each port for locking injectors in position while drawing plastic
A control box is mounted under the base plate: there are 2 rear power cords. Temperature controllers, motor speed controllers, and switches are mounted in the front panel, stirrer motors plug into the side panels. A ventilation fan and louvers in the side panels maintain an airflow across the controls and relays
Specification:
115 VAC
20 AMPS
2 x 1000 watt heaters (8.7 amps each)
Motors/Controls (0.5 amps each)
Pot capacity 2 x 96 fluid ozs. (6 quarts total)
1:1 Twin Injector included 8 oz (2 x 4 oz barrels)
Temperature controllers are digital, with Fahrenheit readout and temperature sensors. Temperature is maintained to within +/- 4 deg, although this can be adjusted through the controller
NOTE:
The cost of shipping with full insurance via UPS will be charged at a discounted rate.
Due to the custom nature of these machines, please allow three to four weeks from the time of order to shipping.
