California has issued a Warning for all aluminum products see – CA Prop 65
-
Fuzzy Ball XL Bundle-This bundle comes with 1 Fuzzy Ball XL Mold (all 4 pieces of the mold), 2 separate sets of the Insides (just the 2 inside pieces of the mold), 1 Core Ball Mold (any size you like), and the Fuzzy Ball Clamping System.
-For an additional fee of $50 the Fuzzy Ball XL Bundle is available with DIFFERENT Ball sizes for the 2 cavities. For example: you could have one cavity with the 5/8" ball and the other cavity with the 1" ball. This option is only available when purchasing the bundle. Please call the office 318-255-7144 to purchase with the 2 different ball sizes.
-
The Core Balls for the Fuzzy XL have many possible uses:
-You can use these to make the center of the ball one color and overlay with another color making a Core Shot
-You can use this as a filler ball so there is not much plastic to have to cool down when you are shooting one of the larger balls. This would reduce set-up time for the plastic and potentially speed up production.
-You can use a different density or grade of plastic for the core. You could have a dense, sinking plastic for the core and a floating formula around it.
-
This is a clamping system specifically designed for the Fuzzy XL Molds but will work with the Fuzz625 and Fuzz750 molds if you put something 1/2" under the mold.
You will attach the two outside parts of the molds (we call them the cones) to the clamps. This will allow the cones to move in and out with the clamps. This allows you to close it, shoot your mold, open it, remove JUST the filled insides, and then place empty insides in, close it, and shoot it again while the first set of insides are cooling and setting up.
-
Fuzzy XL Insides Only are just the two inside pieces of the mold. The insides will need to be the same as the outsides in regards to ball size and leg type. You can not choose a different size ball as all four pieces of the mold makes up the ball.
However, you can choose to have it with the wire or without.
There is a Bundle Option available with Fuzzy XL Mold, 2 Insides Only, Core Ball Mold, and Clamping System.
-
Fuzzy XL has an 3.7" overall diameter. You have different ball size options and different leg shapes to choose from. It does have wire slot but that can be removed at special request.
Please note: The bigger the ball, the longer the set up time is for the injected plastic. If you would like to get a bigger ball please look at our Core Ball Molds for the Fuzzy XL.
-
27 legs extend from the center ball to an outer diameter of 2.5 inches.
Legs have a slight taper to enhance their action.
Primarily designed for catching smallmouth and largemouth bass when using forward-facing sonar.
-
Set of 3 U-Brackets for the Shooting Star and Mini Shooting Star -
Pair of Hot Mill Gloves. (SIZE-XL) -
This Thermal Injector Sleeve helps keep the plastic warm inside your injector. Please note-This is the cost of the Thermal Injector Sleeve only!! Not including the injector!! -
This Port Turner does exactly what it says...opens the ports to the pots for easier cleaning! It is just under 5" in length so that you can hold it easier and still reach the ports.
